OneZeroMiner changelogs

OneZeroMiner

[Miner software]
Info for both supported coins, parameters, and changelog for OneZeroMiner.

Coins

1.3.1

Changelog
Add support for Xelis(xel) coin(Solo mining with 3% dev fee) Dual mining with Xelis+Zil(refer to the sh/bat files in the packages for sample commands) Multiple nodes support Add --max_memory(alias to --chips-memory) for controlling the amount of allocated GPU memory

1.3.0

Changelog
Add ability to take a snapshot of the best found state This feature will save the lowest local minima found every 5 minutes and is capable of loading it in case the miner exits/reconnects for any reason. It can improve the chance of solving SAT jobs and getting the reward. Add options --disable-snapshot to disable the feature and --purge-snapshot to entirely remove the cache folder Fix invalid shares that could happen on jobs other than the main SAT one Fix incorrect allocation of chips when the number of available chips is lower than the rig's capacity Fix --nr issue on Windows that could cause lower hashrate on some cards Minor bug fixes

1.2.9

Changelog
Add support for dynexsolve 2.3.5f protocol Hashrate improvement on some cards Fix a fallback pool issue when the primary server is ssl Multiple fixes related to the reconnection for changing the jobs Minor bug fixes

1.2.8

Changelog
Minor hashrate/efficiency improvement on Dynex Fix an issue with Zilliqa that could result in duplicate shares Overall improvements on the stability of Dynex Minor bug fixes

1.2.7

Changelog
This version is mainly to support dual mining Dynex and Zil. Add support for Zilliqa(0% fee)

1.2.5

Changelog
Hashrate/Efficiency Improvement on some gpus Added new tuning parameter --nr This is a per gpu option and is related to the number of rounds done in one iteration. Default is 1 and the values are 1,2,4 and 8. The best value for almost all gpus is either 1 or 2. Make sure you try both --nr 1 and --nr 2 and let the miner find the best --nt value to get a baseline. Note that higher --nr values might lead to more power fluctuations and higher stale shares.

1.2.4

Changelog
Hashrate/Efficiency Improvement Added new tuning parameter --nt This is a kernel launch parameter and the value can be 1,2,4,8,16 or 32. This can be set per gpu just like OC options. Added an auto tuner for parameter nt Revised atomic update failures to allow 5 minutes of running with no atomic update Minor bug fixes

1.2.3

Changelog
Added support for SSL/TLS pool urls now support ssl:// or stratum+ssl:// prefix to enable ssl Added new option --no-cert-validation to skip SSL/TLS certificate verification. Added rejected shares monitoring to watchdog Revised watchdog's issue handling The miner does a full restart of mallob and pool connections on watchdog issues. Removed the OpenSSL 1.1 dependency and updated internal OpenSSL library to the latest version. OpenSSL is now statically linked Deprecated --max-no-job option since it is redundant and max-no-acc does the same job. This option is disabled in this version and will be removed in the next release. Added more dev pools and randomization of dev pool selection to reduce the load on pools servers Fixed a bug that could freeze the miner on multiple mallob reconnections. Minor bug fixes

1.2.2

Changelog
Minor hashrate improvement(~5%) on some gpus Fixed an issue that could result in 414 errors on mallob re-connection Improved overall stability on mallob re-connection Minor bug fixes

1.2.1

Changelog
Hashrate improvement mostly on 20xx and 30xx gpu series Added a more robust file downloader with progress bar Added ability to remove corrupted or unneeded job files

1.2.0

Changelog
This release is mainly to support dynexsolve 2.3.0. Support for ML, SAT and MAXSAT jobs Adaptive stepsize Randomized parameters Double precision accuracy Note: The hashrates of this version is significantly lower than v1.1.3 because of all the changes made.

1.1.3

Changelog
Changelog * Significant hashrate increase on all gpus. * More than 100% hashrate on 3000 series. (eg: 3090 does 14 kh/s with stock settings) Note: The hashrate increase of this release is not because of any actual improvement. It is simply because we are using single precision (doing math calculations up to 7 decimals) for simulating chips compared to double precision(up to 15 decimals) that was used in the previous versions. Double precision is important for dynex jobs especially the machine learning job and we will switch back to it in the future releases. Meanwhile, enjoy the hashrate boost!

1.1.2

Changelog
Fixed a bug with solution submission Fixed a hashrate reporting issue with small jobs Increased mallob connection timeout

1.1.1

Changelog
* Hashrate improvement on most GPUs * Fixed Windows build issue * Added Minerstat API to HiveOS package * Added an average period for the reported power consumption. Power is now calculated by averaging over the past five seconds. * Minor bug fixes

1.1.0

Changelog
Hashrate improvement on some GPUs. Added overclocking support: --coff --moff --cclk. Only supported on 20xx series and newer models: --mclk. Only supported on 30xx series and newer models: --pl --fan. All of these options are comma separated lists. Use * to skip a gpu. Added full stats of shares, clocks, efficiency, fan and power consumption. Added watchdog options: --max-no-job --max-no-acc. Added support for failover pools. Added support for multiple mallob servers. Fixed poolside hashrate loss on stratum reconnection. Fixed an issue related to timestamps. Revised the handling of atomic update failures. The miner will try for a successful update in 15 minutes instead of shutting down. Added multiple dev pool servers. Minor bug fixes

1.0.3

Changelog
Hashrate improvement: 4090: 10 KH/s. 3090: 5.2 KH/s. 2080ti: 3.7 KH/s. 1080ti: 3 KH/s. Were measured with stock settings and no miner parameters. Fixed hashrate loss issue on 40xx cards. Add support for compute 7.0 (Titan V). Fixed a CPU verification issue. Added miner uptime stat. Minor bug fixes

1.0.2

Changelog
Fixed 8 GPUs limit Fixed an issue that could cause local minima 0 Added a more robust job downloader Added job3 file to packages Added POUW stats to logs Added decimal support for chips-memory option Removed intensity option as it's confusing and unnecessary Some minor bug fixes Added support for mmpOS. The HiveOS package should work on mmpOS too

	Articles
	ASICs
	Calculator
	Coins
	CPU Calculator
	CPUs
	FPGAs

	GPU Calculator
	GPUs
	Guides
	MinerOptions
	Miners
	Pools

	API
	Widgets
	Requests
	Privacy policy

	Bimex
	Binance
	BingX
	BitMart
	Bybit
	CoinBase
	CoinEx
	Gate.io
	KuCoin
	MEXC
	nonkyc
	OKX
	SafeTrade
	TradeOgre
	Xeggex

	Mineshop
	mmpOS
	SimpleMining
	HiveOS
	NiceHash
	CoinPayments
	Kryptex
	Octominer